""
solarpvinverter.comPV inverters, 1-500 kW

Guide

Solar PV inverter applications, by load and by site

The same 10 kW of modules needs a different inverter on a stable European grid, a weak Indian feeder, and a farm with no grid at all. These six configurations cover most of what we ship.

An inverter is chosen by the load it must carry and the supply it must synchronise to, not by the size of the array. These are the six configurations we ship most often, with the model family that fits each.

Residential rooftop, 3-10 kW

Single-phase grid-tied where the grid is stable; 48 V hybrid where it is not. The deciding detail is usually the evening load: a house with air conditioning and an EV needs 8-10 kW of inverter, not 5 kW, because those loads run simultaneously after sunset.

Single-phase on-grid → · 48 V hybrid →

Commercial and industrial rooftop, 30-500 kW

Three-phase string inverters, one per roof plane, with string-level monitoring. Above 100 kW the design question is not the inverter but the string layout: 22-24 modules per string on a 1000 V window, one MPPT per orientation, and a DC/AC ratio of 1.15-1.25.

Commercial string inverters →

Off-grid and microgrid, 1-100 kW

Transformer-based machines with 3x surge, generator input and a battery bank sized for three days of autonomy. The failure mode to design out is motor starting: a 1.5 kW pump draws 4-6 kW for two seconds, and a high-frequency inverter rated 3 kW will trip.

Off-grid inverters →

Storage and peak shaving, 30-500 kW

A battery PCS in a factory shaves the demand peak, which is charged in kW, not kWh — the saving is on the bill's demand line, often 30-40 % of the total. Size the PCS to the peak you want to remove, and the battery to the duration you need.

Battery PCS →

Water pumping, 0.75-75 kW

Solar pump VFDs replace diesel on irrigation. The economics are blunt: diesel at US$ 0.30-0.45/kWh against solar at US$ 0.05-0.08/kWh, with no fuel logistics. Payback is typically 2-3 seasons.

Solar pump inverters →

Shaded and complex roofs

Microinverters where shade, orientation changes or planning rules make DC-on-the-roof undesirable. Higher cost per watt, but 10-25 % more yield on a difficult roof and module-level monitoring.

Microinverters →

Tell us what you are building

Send the specification and we reply with a sized quotation in one working day.