Guide
Solar PV inverter questions, answered plainly
Sizing, price, phase, battery voltage, certificates and OEM terms — the questions that come up in almost every enquiry, answered without a sales pitch.
General
What is a solar PV inverter and what does it do?
A solar PV inverter converts the direct current (DC) produced by photovoltaic modules into alternating current (AC) that appliances, the grid or a battery system can use. It also tracks the array's maximum power point, provides safety isolation, and monitors yield. Without it, a PV array produces nothing usable.
How much does a solar PV inverter cost in 2026?
Ex-works, our range starts at US$ 96 for a 1 kW single-phase grid-tied unit, about US$ 238 for 5 kW, US$ 498 for 10 kW three-phase, US$ 1,490 for a 12 kW split-phase hybrid, and US$ 4,980 for a 136 kW commercial string inverter. Installed prices are typically 1.6–2.2× the hardware cost once mounting, DC/AC protection, cabling and commissioning are included.
What size inverter do I need?
Size to the array's DC capacity divided by the local irradiance factor, roughly 1.1–1.3× for grid-tied, and to the peak simultaneous load for hybrid and off-grid. A 6 kWp residential array works well on a 5 kW inverter; an off-grid cabin with a 3 kW peak load needs a 3 kW unit with 9 kVA surge.
Which is better, a string inverter or microinverters?
String inverters are cheaper per watt and easier to service; microinverters win on shaded, multi-orientation or frequently expanded roofs. For a clean south-facing array, a string inverter is the better investment; for a complicated roof, module-level conversion pays for itself in yield.
What certifications should a PV inverter have?
IEC 62109-1/-2 for safety, IEC 61727/62116 for grid connection, EN 50549 or VDE-AR-N 4105 for Europe, UL 1741 SB and IEEE 1547 for North America, and CE/UKCA marking. Country-specific grid codes (AS/NZS 4777.2, NRS 097, ABNT NBR 16149) decide whether a unit can legally connect.
Do you offer OEM and ODM?
Yes. We build under customer brands from 100 units: custom label, enclosure colour, firmware splash screen, manual and packaging, plus certificate transfer where the standard allows. Lead time is 20–30 days for repeat models.
On-grid 1-phase
How much does a 5 kW solar PV inverter cost?
Ex-works, a 5 kW single-phase unit runs about US$ 238 in our range. Installed with DC/AC protection, mounting and commissioning, budget US$ 550–900 depending on the country and whether a CT clamp or export limiter is required.
Can I oversize the PV array on a 5 kW inverter?
Yes — up to 150 % DC/AC ratio is allowed on our single-phase range (7.5 kWp of modules on a 5 kW inverter). You lose a little at midday in perfect weather but gain substantially on cloudy mornings and in winter.
Single-phase or three-phase inverter?
If the house has a single-phase supply (most of Europe, Asia, Africa) use single-phase. Above roughly 6 kW, or where the utility requires balanced feed-in, move to a three-phase unit — the extra cost is small and the grid sees balanced current.
On-grid 3-phase
What is the price of a 10 kW three-phase inverter?
About US$ 498 ex-works for our PVS-10K-T. Three-phase machines cost roughly 15–20 % more than an equivalent single-phase unit because of the extra AC stage.
Can a three-phase inverter run on a single-phase supply?
No. The machine expects 400 V three-phase and will fault on missing phases. If the site has only single-phase power, use single-phase inverters, or a hybrid unit with a managed phase-balance output.
Do I need a type A or type B RCD?
Type A is sufficient for transformerless inverters unless the local code or utility specifies type B; our units include integrated DC residual-current monitoring to IEC 62109-2.
Hybrid LV 48V
What size hybrid inverter do I need for a house?
Size to the peak simultaneous load, not the monthly kWh: a typical European home needs 5 kW, a US home with central air 8–10 kW, an off-grid cabin 3 kW. Battery size then follows the night-time consumption.
Can a 48 V hybrid inverter run without a battery?
Most of our hybrid range can run PV-only in grid-tied mode with the battery input disabled, which lets you add storage later. Off-grid operation always needs a battery.
Does a hybrid inverter work with my existing solar?
Yes, if the existing array's voltage sits inside the MPPT window (120–500 V on the 48 V models). Existing grid-tied inverters cannot be retrofitted into the hybrid — the hybrid replaces them, and the old unit can be kept as a spare or sold.
Hybrid HV
HV or LV battery — which should I choose?
Below about 10 kWh and 6 kW, 48 V is cheaper and easier to service. Above that, HV wins on cable size, efficiency and parallel scalability. Commercial projects above 20 kWh are almost always HV.
Can I mix battery brands on a high-voltage hybrid?
No. The inverter must speak the battery's BMS protocol, and HV packs are series-stacked, so one brand and one model per stack. Choose the battery first, then confirm the inverter's protocol list.
Is a high-voltage hybrid inverter safe to install?
Yes, with the same DC precautions as a string inverter: 800 V DC is lethal if mishandled, so the battery must have an integral breaker and the installer must be qualified for DC work above 120 V.
Split-phase 120/240
Can I use a European inverter in the US?
Not legally for grid-tie: it lacks UL 1741 listing and produces 230 V single-phase, not 120/240 V split-phase. Off-grid only, and even then the charger and breakers must be NRTL-listed.
What size split-phase inverter for a US home?
8 kW covers most homes without electric resistance heat; 10–12 kW if there is a heat pump, EV charger and well pump. Above 12 kW, parallel two units rather than buying a commercial machine.
Does it work with a 120 V-only generator?
The generator input accepts 120/240 V split-phase. A 120 V-only generator can charge the battery through a separate charger but cannot pass through to 240 V loads.
Off-grid
How do I size an off-grid inverter?
Add the simultaneous loads, then add the largest motor's starting surge. A cabin with lights, fridge, TV and a 1 hp pump needs about 3 kW continuous and 6 kVA surge — so a 3 kW/9 kVA unit fits.
48 V or 24 V battery bank?
48 V above 3 kW, always: it halves the current and the cable cost. 24 V is fine for 2–3 kW cabins, 12 V only for lighting and small loads.
Can an off-grid inverter charge from the grid?
Yes — the built-in charger takes 230 V mains or generator input at up to 60 A, which is how most hybrid off-grid systems top up in the rainy season.