""
solarpvinverter.comPV inverters, 1-500 kW

Guide

Certificates, testing and what the warranty really covers

A certificate proves a design passed a test once. A test line proves every unit does. Both matter, and both are documented per serial number.

Certificates are the entry ticket; the test sequence behind them is what determines field failure rate. Every unit we ship goes through the same eight-station line, and the report travels with the serial number.

Certificates we hold

StandardScopeStatus
IEC 62109-1 / -2Safety of PV power convertersCertified, TÜV
IEC 61727 / 62116Utility interface, anti-islandingTested
EN 50549-1/-2European grid connectionCertified
VDE-AR-N 4105German LV grid codeCertified
UL 1741 SB / IEEE 1547North American interconnectionCertified (split-phase range)
AS/NZS 4777.2Australia / New ZealandCertified
NRS 097-2-1South AfricaTested
IEC 63027DC arc-fault detectionCertified (commercial range)

The eight-station test line

  • Incoming inspection — IGBT/MOSFET lot traceability, capacitor date codes, PCB AOI.
  • In-circuit test — every board powered and measured before assembly.
  • Functional test — MPPT sweep, AC output THD, relay timing, communication loop.
  • Hi-pot — 2.5 kV DC insulation test for 60 s on the DC-AC barrier.
  • Burn-in — 4 h at 60 % load and 45 °C ambient, which catches early capacitor and fan failures.
  • Grid simulation — anti-islanding, voltage/frequency ride-through, export limiting.
  • Final QA — enclosure torque check, IP gasket inspection, label and firmware version audit.
  • Packing drop test — 1.2 m drop on a corner, then a repeat functional check on the sampled unit.

Warranty, in plain terms

Product groupStandardExtension
Single-phase grid-tied5 years10 years on registration
Three-phase grid-tied5 years10 years
Hybrid and off-grid5 years8 years
Commercial string5 years10 years
Microinverter10 years25 years on registration
Battery PCS3 years5 years

What is not covered, honestly

Lightning damage without external SPD, water ingress from an unsealed gland, units installed in a confined space above 50 °C, and firmware modified by the customer. Those four account for most of the warranty claims we reject, and each is avoidable at installation.

Tell us what you are building

Send the specification and we reply with a sized quotation in one working day.