Grid-tied · 5–25 kW
Three-phase on-grid solar inverter, 5–25 kW
Balanced three-phase feed-in for larger homes, shops and small industry: 5–25 kW, dual MPPT, 98.2 % peak.
Three-phase inverters matter wherever the supply is 400 V: Europe, the Gulf, most of Asia and any industrial site. Feeding all three phases evenly avoids the imbalance penalty that some utilities charge and lets a single machine serve loads that a single-phase unit cannot start.
From 5 kW to 25 kW the architecture is the same: two or three MPPTs, a wide 200–1000 V DC window, and an AC stage that stays at 98 %+ across the load range rather than only at one sweet spot. That flat efficiency curve matters more than the peak number, because a shop's load is rarely at 100 %.
Models and ex-works prices
| Model | Rated AC | MPPT / strings | Ex-works |
|---|---|---|---|
| PVS-5K-T | 5 kW | 2 / 2 | US$ 396 |
| PVS-8K-T | 8 kW | 2 / 2 | US$ 452 |
| PVS-10K-T | 10 kW | 2 / 2 | US$ 498 |
| PVS-12K-T | 12 kW | 2 / 2 | US$ 548 |
| PVS-15K-T | 15 kW | 2 / 3 | US$ 638 |
| PVS-20K-T | 20 kW | 2 / 4 | US$ 748 |
| PVS-25K-T | 25 kW | 3 / 6 | US$ 862 |
Prices are ex-works, indicative and exclude freight, duty and installation. Model numbers shown are our standard range; OEM labelling is available from 100 units.
What makes this range different
Wide 200–1000 V MPPT window
Long strings of 20–22 modules without a combiner, or short strings in a 3-string design — the same chassis covers both.
98.2 % peak, 97.8 % weighted
The weighted figure is what the kWh meter sees over a year; we publish both.
Type II DC and AC SPD inside
Surge protection is built in, not an optional box, which matters on overhead-line networks with frequent lightning.
Parallel up to 6 units
Six 25 kW machines can be paralleled for 150 kW of capacity with one monitoring view, without buying a central inverter.
Typical projects
- Villas and farms with 400 V supply
- Shops, workshops and cold rooms 10-25 kW
- Schools and clinics with three-phase distribution
Frequently asked questions
What is the price of a 10 kW three-phase inverter?
About US$ 498 ex-works for our PVS-10K-T. Three-phase machines cost roughly 15–20 % more than an equivalent single-phase unit because of the extra AC stage.
Can a three-phase inverter run on a single-phase supply?
No. The machine expects 400 V three-phase and will fault on missing phases. If the site has only single-phase power, use single-phase inverters, or a hybrid unit with a managed phase-balance output.
Do I need a type A or type B RCD?
Type A is sufficient for transformerless inverters unless the local code or utility specifies type B; our units include integrated DC residual-current monitoring to IEC 62109-2.
Not sure which model fits? Send the array size, the site's temperature range and the grid code — we size it and quote in one working day.